@n8n-dev/n8n-nodes-gambitcomm-mimic

---

Stop writing gambitcomm-mimic API integrations by hand.

Every time you connect n8n to gambitcomm-mimic, you waste hours mapping endpoints, defining parameters, and debugging schemas. You copy-paste from docs, fix edge cases, and pray nothing breaks.

What if connecting n8n to gambitcomm-mimic took 5 minutes, not half a day?

This node gives you 19+ resources out of the box: Access, Agent, COAP, DHCP, IPMI, and 14 more: with full CRUD operations, typed parameters, and zero manual configuration.

---

What You Get

• Zero boilerplate: Resources, operations, and fields are pre-configured and ready to use
• Full CRUD: Create, read, update, and delete support where the API allows it
• Typed parameters: No more guessing field types
• Built-in auth: API key authentication, ready to go
• Declarative: Native n8n performance, no custom execute() overhead

---

Install

npm install @n8n-dev/n8n-nodes-gambitcomm-mimic

Or in n8n:

1. Settings → Community Nodes → Install
2. Search: @n8n-dev/n8n-nodes-gambitcomm-mimic
3. Click Install

---

Quick Start

1. Install the node (above)
2. Add credentials: gambitcomm-mimic API → paste your API key
3. Drag the gambitcomm-mimic node into your workflow
4. Pick a resource → pick an operation → done.

That's it. No configuration files. No code. It just works.

---

Resources

Access (11 operations)

• Post Adds Overwrites the user entry in the access control database
• Delete Clears a users entry from access control database
• Get Returns the current access control database in use
• Get Returns the current admin directory
• Get Returns the current administrator
• Get Returns the state of access control checking
• Get Returns an array of entries
• Put Loads the specified file for access control data
• Put Saves current access control data in specified file
• Put Allows setting the name of the current access control database
• Put Allows the user to enable disable the access control check

Agent (78 operations)

• Post Add an agent
• Post Add a source address that the agent will accept messages from
• Delete a source address that the agent will accept messages from
• Get List the source addresses that the agent will accept messages from
• Get has the agent value space changed
• Get has the lab configuration changed
• Get one way transit delay in msec
• Get drop rate every N th PDU 0 means no drops
• Get host address of the agent
• Get timeout in seconds for retransmitting INFORM PDUs
• Get network interface card for the agent
• Get subnet mask of the agent
• Get set of MIBs simulations and scenarios
• Get number of starts for the agent
• Get MIB directory of the agent
• Get owner of the agent
• Get maximum PDU size
• Get port number
• Get private directory of the agent
• Get protocols supported by agent
• Get read community string
• Get first scenario name
• Get first simulation name
• Get relative start time
• Get current running state of the agent
• Get has the agent state changed
• Get current statistics of the agent instance
• Get SNMP PDU tracing
• Get SNMP SET validation policy
• Get write community string
• Put Halt the current agent
• Post Adds a new ipalias for the agent
• Delete s an existing ipalias from the agent
• Get Lists all the additional ipaliases configured for the agent
• Put Starts an existing ipalias for the agent
• Get Returns the status 0 down 1 up of an existing ipalias for the agent
• Put Stops an existing ipalias for the agent
• Put Pause the current agent
• Get Returns the protocol s configuration
• Put Reload the current agent
• Delete Remove the current agent
• Put Resume the current agent
• Put Save agent MIB values
• Put one way transit delay in msec
• Put drop rate every N th PDU
• Put host address of the agent
• Put timeout in seconds for retransmitting INFORM PDUs
• Put network interface card for the agent
• Put subnet mask of the agent
• Put set of MIBs simulations and scenarios
• Put MIB directory of the agent
• Put owner of the agent
• Put maximum PDU size
• Put port number
• Put private directory of the agent
• Put protocols supported by agent as a comma separated list
• Put read community string
• Put relative start time
• Put SNMP PDU tracing
• Put SNMP SET validation policy
• Put write community string
• Put Start the current agent
• Put Show the agent s primary IP address
• Put This command copies the variable store from the other agent to this agent
• Get This command can be used as a predicate to ascertain the existence of a given variable
• Get Fetches the value associated with a variable
• Get This command will return the list of variables in the said scope
• Put These commands treat the variable as a list and allow to replace an entry in the list at the specified index with the specified value The variable has to already exist
• Get This command can be used as a predicate to ascertain the persistence of a given variable
• Put These commands allow the creation of a new variable or changing an existing value
• Put Deletes a variable which is currently defined
• Post Add a new timer script to be executed at specified interval in msec with the specified argument
• Delete Remove a timer script from the execution list
• Get List the timer scripts currently running along with the their intervals
• Post Add a trap destination to the set of destinations
• Delete Remove a trap destination from the set of destinations
• Get List the set of trap destinations for this agent instance
• Get List the outstanding asynchronous traps for this agent instance

COAP (7 operations)

• Get Show the agent s COAP argument structure
• Get Show the agent s COAP configuration
• Get Show the agent s COAP statistics
• Get Show the agent s COAP traffic tracing
• Put Set the agent s COAP configuration
• Put Set the agent s COAP traffic tracing
• Get Show the COAP statistics headers

DHCP (8 operations)

• Get Show the agent s DHCP argument structure
• Get Show the agent s DHCP configuration
• Get Show the agent s DHCP statistics
• Get Show the agent s DHCP traffic tracing
• Get Show the parameters configured by the server in its DHCP OFFER message
• Put Set the agent s DHCP configuration
• Put Set the agent s DHCP traffic tracing
• Get Show the DHCP statistics headers

IPMI (9 operations)

• Get Show the agent s IPMI argument structure
• Get Show the agent s IPMI configuration
• Get Show the agent s IPMI statistics
• Get Show the agent s IPMI traffic tracing
• Get Show the outgoing message s attributes
• Put Set the agent s IPMI configuration
• Put Set the agent s IPMI traffic tracing
• Put Set the outgoing message s attributes
• Get Show the IPMI statistics headers

MQTT (32 operations)

• Get Show the agent s MQTT TCP connection state
• Get Show the agent s MQTT state
• Get Show the agent s current messages cardinality
• Get Show the agent s message attributes
• Put Set the agent s message attributes
• Put Restart receiving messages from a subcription of the agent
• Put Abort agent s MQTT TCP session without sending DISCONNECT command
• Put Start agent s MQTT TCP session
• Put Disconnect agent s MQTT TCP session by sending DISCONNECT command
• Put Set the agent s MQTT TCP connection target broker
• Put Set the agent s MQTT session
• Put Set the agent s MQTT client ID
• Put Set the agent s MQTT TCP keepalive
• Put Set the agent s MQTT disconnection action
• Put Set the agent s MQTT client password
• Put Set the agent s MQTT TCP connection target port
• Put Set the agent s MQTT client username
• Put Set the agent s MQTT client s will
• Put Set the agent s MQTT will message s QOS field
• Put Set the agent s MQTT retained will
• Put Set the agent s MQTT client will s topic
• Get Show the agent s current subscriptions cardinality
• Get Show the agent s subscription attributes
• Put Set the agent s subscribe attributes
• Put Stops receiving messages from a subcription of the agent
• Get Show the agent s MQTT argument structure
• Get Show the agent s MQTT configuration
• Get Show the agent s MQTT statistics
• Get Show the agent s MQTT traffic tracing
• Put Set the agent s MQTT configuration
• Put Set the agent s MQTT traffic tracing
• Get Show the MQTT statistics headers

NETFLOW (16 operations)

• Put Change NETFLOW data export interval
• Put Change NETFLOW template export interval
• Put Change NETFLOW export attributes
• Get Show list of NETFLOW exports
• Get Show the agent s NETFLOW argument structure
• Get Show the agent s NETFLOW configuration
• Get Show the agent s NETFLOW statistics
• Get Show the agent s NETFLOW traffic tracing
• Put Halt NETFLOW traffic
• Put Reload NETFLOW configuration before resuming traffic
• Put Resuming traffic
• Put Swap NETFLOW collector
• Put Set the agent s NETFLOW configuration
• Put Swap NETFLOW configuration file
• Put Set the agent s NETFLOW traffic tracing
• Get Show the NETFLOW statistics headers

PROXY (13 operations)

• Get Show the agent s PROXY argument structure
• Get Show the agent s PROXY configuration
• Get Show the agent s PROXY statistics
• Get Show the agent s PROXY traffic tracing
• Post Add individual proxy target on the agent and the simulator host
• Get Check individual target
• Get List all proxy targets
• Delete Remove individual proxy target on the agent and the simulator host
• Put Start additional target
• Put Stop additional target
• Put Set the agent s PROXY configuration
• Put Set the agent s PROXY traffic tracing
• Get Show the PROXY statistics headers

SFLOW (10 operations)

• Get Show the agent s SFLOW argument structure
• Get Show the agent s SFLOW configuration
• Get Show the agent s SFLOW statistics
• Get Show the agent s SFLOW traffic tracing
• Put Halt SFLOW traffic
• Put Reload SFLOW configuration before resuming traffic
• Put Resuming traffic
• Put Set the agent s SFLOW configuration
• Put Set the agent s SFLOW traffic tracing
• Get Show the SFLOW statistics headers

SNMPTCP (11 operations)

• Get Show the agent s SNMPTCP argument structure
• Get Show the agent s SNMPTCP configuration
• Get Show the agent s SNMPTCP statistics
• Get Show the agent s SNMPTCP traffic tracing
• Put Disable individual IP aliases on the agent and the simulator host
• Put Enable individual IP aliases on the agent and the simulator host
• Get Check individual IP aliases on the agent and the simulator host
• Get List all IP aliases on the agent and the simulator host
• Put Set the agent s SNMPTCP configuration
• Put Set the agent s SNMPTCP traffic tracing
• Get Show the SNMPTCP statistics headers

SNM Pv 3 (26 operations)

• Post Adds a new access entry with the specified parameters
• Delete Clears all access entries
• Delete s the specified access entry
• Get Returns the current acccess entries as an array of strings
• Get Returns the SNMPv3 configuration
• Get Retrieves the contextEngineID for the agent instance
• Get Retrieves the number of times the agent has been restarted
• Get For started agents retrieves the current engineID in use by the snmpv3 module
• Get Retrieves the time in seconds for which the agent has been running
• Post Adds a new group entry with the specified parameters
• Delete Clears all group entries
• Delete s the specified group entry
• Get Returns the current group entries as an array of strings
• Put Changes the SNMPv3 configuration
• Post Adds a new user entry with the specified parameters
• Delete Clears all user entries
• Delete s the specified user entry
• Get Returns the current user entries as a Tcl list
• Put Saves current user settings in the currently loaded USM config file
• Put Saves current user settings in the specified USM config file
• Put Saves current group access view settings in the currently loaded VACM config file
• Put Saves current group access view settings in the specified VACM config file
• Post Adds a new view entry with the specified parameters
• Delete Clears all view entries
• Delete s the specified view entry
• Get Returns the current view entries as an array of strings

SSH (11 operations)

• Get Show the agent s SSH argument structure
• Get Show the agent s SSH configuration
• Get Show the agent s SSH statistics
• Get Show the agent s SSH traffic tracing
• Put Disable individual IP aliases on the agent and the simulator host
• Put Enable individual IP aliases on the agent and the simulator host
• Get Check individual IP aliases on the agent and the simulator host
• Get List all IP aliases on the agent and the simulator host
• Put Set the agent s SSH configuration
• Put Set the agent s SSH traffic tracing
• Get Show the SSH statistics headers

SYSLOG (10 operations)

• Get Show the agent s SYSLOG argument structure
• Get Show the agent s SYSLOG configuration
• Get Show the agent s SYSLOG statistics
• Get Show the agent s SYSLOG traffic tracing
• Get Show the outgoing message s attributes
• Post Set the agent s SYSLOG traffic tracing
• Put Set the agent s SYSLOG configuration
• Put Set the agent s SYSLOG traffic tracing
• Put Set the outgoing message s attributes
• Get Show the SYSLOG statistics headers

TELNET (20 operations)

• Put Changes the connection s current logon
• Put Executes the command asynchronously
• Put Triggers the asynchronous signal event with the specified signal name
• Get Show the agent s TELNET argument structure
• Get Show the agent s TELNET configuration
• Get Show the agent s TELNET statistics
• Get Show the agent s TELNET traffic tracing
• Put Disable individual IP aliases on the agent and the simulator host
• Put Enable individual IP aliases on the agent and the simulator host
• Get Check individual IP aliases on the agent and the simulator host
• Get List all IP aliases on the agent and the simulator host
• Get Show the agent s TELNET connections
• Get Show the agent s TELNET keymap file name
• Get Show the agent s TELNET rules DB file name
• Get Show the agent s TELNET server state
• Get Show the agent s TELNET user DB file name
• Get Show the agent s TELNET users
• Put Set the agent s TELNET configuration
• Put Set the agent s TELNET traffic tracing
• Get Show the TELNET statistics headers

TFTP (14 operations)

• Get Show the agent s TFTP argument structure
• Get Show the agent s TFTP configuration
• Get Show the agent s TFTP statistics
• Get Show the agent s TFTP traffic tracing
• Post Create a read session to download srcfile from server
• Post Create a read session to upload srcfile to server
• Put Set the agent s TFTP configuration
• Put Set the agent s TFTP traffic tracing
• Get Show a parameter of a TFTP sesssion
• Put Set a parameter of a TFTP sesssion
• Put Start a TFTP sesssion
• Get Check a TFTP sesssion s status
• Put Stop a TFTP sesssion
• Get Show the TFTP statistics headers

TOD (8 operations)

• Get Show the agent s TOD argument structure
• Get Show the agent s TOD configuration
• Get Show the agent s TOD statistics
• Get Show the agent s TOD traffic tracing
• Get Retrieve TOD time
• Put Set the agent s TOD configuration
• Put Set the agent s TOD traffic tracing
• Get Show the TOD statistics headers

WEB (13 operations)

• Get Show the agent s WEB argument structure
• Get Show the agent s WEB configuration
• Get Show the agent s WEB statistics
• Get Show the agent s WEB traffic tracing
• Post Add the agent s WEB port
• Get Show the agent s WEB port
• Delete Remove the agent s WEB port
• Put Set the agent s WEB port attribute
• Put Start the agent s WEB port
• Put Stop the agent s WEB port
• Put Set the agent s WEB configuration
• Put Set the agent s WEB traffic tracing
• Get Show the WEB statistics headers

Valuespace (20 operations)

• Post Add an entry to a table
• Get Evaluate the values of the specified instance instance for each specified MIB object object and return it as it would through SNMP requests
• Get a variable in the Value Space
• Get Return the syntactical information for the specified object such as type size range enumerations and ACCESS
• Get Display the MIB object instances for the specified object
• Get Display the MIB objects below the current position
• Get Evaluate the values of the specified instance instance for each specified MIB object object and return it as it would through SNMP requests
• Get multiple variables in the Value Space
• Get Return the MIB that defines the specified object
• Put Set multiple variables in the Value Space
• Put Unset multiple variables in the Value Space
• Get Return the symbolic name of the specified object identifier
• Get Return the numeric OID of the specified object
• Delete Remove an entry from a table
• Put Set a variable in the Value Space
• Get Split the numerical OID into the object OID and instance OID
• Get the state of a MIB object object
• Put Set the state of a MIB object object
• Put Unset a variable in the Value Space in order to free its memory
• Get Display the variables for the specified instance instance for the specified MIB object object

Daemon (39 operations)

• Put Clear the lab configuration
• Get The list of agentnum statistics for agents that are currently active and whose statistics have changed since the last invocation of this command
• Get The list of agentnum that are currently active running or paused
• Get The currently loaded lab configuration file for the particular user
• Get This predicate indicates if the currently loaded agent configuration file has changed
• Get The list of agentnum for which a configurable parameter changed
• Get The list of agentnum state for which the state changed
• Get The number of clients currently connected to the daemon
• Get The list of agentnum that are currently configured
• Get The set of network interfaces that can be used for simulations
• Get The last configured agent instance
• Get The current log file for the Simulator
• Get The maximum number of agent instances
• Get The network address of the host where the MIMIC simulator is running
• Get The default network device to be used for agent addresses
• Get The product number that is licensed
• Get The set of protocols supported by the Simulator
• Get The return mode
• Get The version of the MIMIC command interface
• Put Load the lab configuration file file
• Get multiple sets of information about MIMIC where infoArray is one of the parameters defined in the mimic get command
• Put Save the lab configuration
• Put Save the lab configuration in file
• Put The current log file for the Simulator
• Put The network address of the host where the MIMIC simulator is running
• Put This operation flushes all global objects which need to be made persistent to disk
• Put Start MIMIC
• Put Stop MIMIC
• Get This command can be used as a predicate to ascertain the existence of a given variable
• Get Fetches the value associated with a variable
• Get This command will return the list of variables in the said scope
• Put These commands treat the variable as a list and allow to replace an entry in the list at the specified index with the specified value The variable has to already exist
• Get This command can be used as a predicate to ascertain the persistence of a given variable
• Put Set the variable store for the global storage
• Put Deletes a variable which is currently defined
• Put Terminate the MIMIC daemon
• Post Add a new timer script to be executed at specified interval in msec with the specified argument
• Delete Remove a timer script from the execution list
• Get List the timer scripts currently running along with the their intervals

---

Why This Node?

Without this node:

• Hours of manual API integration
• Copy-pasting from gambitcomm-mimic docs
• Debugging auth, pagination, error handling
• Maintaining your own client code

With this node:

• Install → configure → use. 5 minutes.
• Auto-generated from the official gambitcomm-mimic OpenAPI spec
• Always up to date when the API changes
• Native n8n performance

---

Auto-Generated

This node was auto-generated from the official gambitcomm-mimic OpenAPI specification using
@n8n-dev/n8n-openapi-node-ultimate,
then validated against the live API so you get accurate types and real parameters, not guesswork.

When the gambitcomm-mimic API updates, this node updates too.

---

License

MIT © kelvinzer0