Actions76
- Advert Actions
- Channel Actions
- Contact Actions
- Device Actions
- Export Private Key
- Factory Reset
- Get Allowed Repeat Frequencies
- Get Auto Add Config
- Get Battery Voltage
- Get Custom Variables
- Get Device Info
- Get Device Time
- Get Radio Parameters
- Get Self Info
- Get Self Telemetry
- Get Stats
- Get Tuning Parameters
- Reboot
- Set Advert Name
- Set Auto Add Config
- Set Custom Variable
- Set Device Pin
- Set Device Time
- Set Other Parameters
- Set Path Hash Mode
- Set Radio Parameters
- Set Tuning Parameters
- Sign Data
- Sync Device Time
- Diagnostic Actions
- Flood Scope Actions
- Message Actions
- Repeater Actions
- Utility Actions
Device → Set Other Parameters
AI-generatedSummary
Set the device’s contact-add behavior and telemetry, advert-location, and message-acknowledgement parameters. The node sends the configured values to the connected MeshCore device.
Inputs
- Manual Add Contacts — Whether contacts must be added manually; defaults to false.
- Telemetry Mode (Base) — Controls who may read battery and basic device telemetry: Disabled, Always, Device Only, or Contacts Only; defaults to Disabled.
- Telemetry Mode (Location) — Controls who may read location telemetry, using the same four modes; defaults to Disabled.
- Telemetry Mode (Environment) — Controls who may read environment sensor telemetry, using the same four modes; defaults to Disabled.
- Advert Location Policy — Numeric policy for how much location detail appears in device adverts; defaults to 0 and accepts 0–255.
- Multi Acks — Number of acknowledgements sent per delivered message; defaults to 0 and accepts 0–255.
Output shape
A single result item containing the device command response.
The source shows this operation writes the configured parameters with the device’s set-other-parameters command. The supplied source excerpt does not show the operation handler’s return mapping, so the exact response fields are not specified.