Actions76
- Advert Actions
- Channel Actions
- Contact Actions
- Device Actions
- Export Private Key
- Factory Reset
- Get Allowed Repeat Frequencies
- Get Auto Add Config
- Get Battery Voltage
- Get Custom Variables
- Get Device Info
- Get Device Time
- Get Radio Parameters
- Get Self Info
- Get Self Telemetry
- Get Stats
- Get Tuning Parameters
- Reboot
- Set Advert Name
- Set Auto Add Config
- Set Custom Variable
- Set Device Pin
- Set Device Time
- Set Other Parameters
- Set Path Hash Mode
- Set Radio Parameters
- Set Tuning Parameters
- Sign Data
- Sync Device Time
- Diagnostic Actions
- Flood Scope Actions
- Message Actions
- Repeater Actions
- Utility Actions
Diagnostic → Send Raw Data
AI-generatedSummary
Sends a caller-supplied hexadecimal payload as a RAW_CUSTOM packet through the connected MeshCore device. Optionally routes it over a hex path on meshes with one-byte path hashes; an empty path sends zero-hop.
Inputs
- Path — Optional route as hex path-hash bytes. Leave empty for zero-hop. A non-empty path is only supported on meshes with one-byte path hashes.
- Raw Data (required) — Payload as hexadecimal, at least 4 bytes. The device wraps it in a
RAW_CUSTOMpacket.
Output shape
A single n8n item containing the device command result.
The operation sends the raw payload and path to the device; it does not parse or decode the payload. The device's command response determines the returned result.