Actions76
- Advert Actions
- Channel Actions
- Contact Actions
- Device Actions
- Export Private Key
- Factory Reset
- Get Allowed Repeat Frequencies
- Get Auto Add Config
- Get Battery Voltage
- Get Custom Variables
- Get Device Info
- Get Device Time
- Get Radio Parameters
- Get Self Info
- Get Self Telemetry
- Get Stats
- Get Tuning Parameters
- Reboot
- Set Advert Name
- Set Auto Add Config
- Set Custom Variable
- Set Device Pin
- Set Device Time
- Set Other Parameters
- Set Path Hash Mode
- Set Radio Parameters
- Set Tuning Parameters
- Sign Data
- Sync Device Time
- Diagnostic Actions
- Flood Scope Actions
- Message Actions
- Repeater Actions
- Utility Actions
Device → Set Tuning Parameters
AI-generatedSummary
Set the device’s MAC tuning parameters by sending RX delay base and airtime factor values to its firmware. Use the declared ranges to tune receive back-off delay and airtime budgeting.
Inputs
- RX Delay Base (required) — Receive-delay base for MAC back-off, from 0 to 20; firmware default is 0.
- Airtime Factor (required) — Airtime budget multiplier, from 0 to 9; firmware default is 1.
Output shape
A single device command result.
The node sends both values in milli-units to the device. The source pack does not specify the exact result shape.